How To Clean Your Tactical Hydration Pack The Easy Way
If you’re the owner of a hydration pack, you may know that maintenance and care can be tricky – depending on the brand and model. Here’s a look how to be at ease and know you’ve always got tasty fresh source of hydration with you.
Take Good Care Of Your Backpack
The backpack is the heart-piece of your equipment and deserves extra attention and care. Whether you regularly brush it down, wipe it with a fabric or throw it in the wash machine, depends on how muddy and dirty you go – and on the draw of your pack ( pay attention to the rag, and to the caution & manipulation directions that come with your pack ) .
here ’ s cosmopolitan advice on how to give the carry some love and attention before a serious outing – and particularly after pulling it out of storage, say after the winter months :
- Open all pouches and pockets, make sure the zippers are zipping just fine.
- Check for brittle plastic pieces and order replacements if needed.
- Check the seams for potential ruptures.
- Clean the pack inside and outside with a cloth, mild soap and warm water.
- Check if the backpack still fits your back properly.
- Then air it in a dry place until heading outdoors.
One last thing : don ’ triiodothyronine delay till the last moment to go over this checklist ! Give yourself a few days to react and possibly get an upgrade from our line of tactical backpacks in all sizes.
The heartpiece of any tactical outfit: maintenance of the Tactical Hydration Pack is key to ensure its functionality over a long time As we ’ re talking about tactical hydration packs, the wish and function of the backpack ( or any bulge or compact ) is important, but any dirt is largely a cosmetic problem. not then with the actual water bladder : any crap or pollution may cause a bad taste and worst case a health-issue. thus here ’ s an in-depth front at the hydration bladder hygiene .
How To Clean a Hydration Bladder
How frequently should you clean your tactical hydration bladder ? First answer : it depends on the stigmatize. If used with regular water, SOURCE reservoirs do not require specific clean, drying or draining. If used with sweeten, season and isotonic drinks, or before extended storage, we recommend the following clean procedure :
Step 1: Clean the Reservoir
- Disconnect the drinking tube and remove the Widepac closure from the bladder
- Wash the bladder with soapy, lukewarm water and scrub with a soft brush if needed; rinse well;
- Hang the bladder upside down and let it air-dry – do NOT use a hairdryer!
- Pro-tip: Place the drinking tube or a paper tissue or any other non-sharp object inside the bladder, to keep the bladder-walls apart.
Step 2: Clean the Drinking Tube
- To clean the tube, connect it to the bladder;
- Open or disconnect the valve and press water through the tube by rolling up the reservoir top-down; rinse the tube with soapy, lukewarm water;
- To clean the tube thoroughly from residue of sweetened drinks, consider cleaning it with our Tube Brush
- Pro-tip: To dry the tube, hold the tube by the valve and swing it a few rounds in a circle (only recommended outside with plenty of airspace).
How to use your hydration pack as a fountain.
Step 3: Clean the Drinking Valve
- After regular use with water, the valve does not need to be disassembled and cleaned; just rinse it with soapy, lukewarm water.
- Deep-cleaning the valve is only recommended when your valve got pushed deep into the mud or if it’s for some other reason completely messy and dirty; disassemble the Helix drinking valve as pictured below.
Disassembling the Helix bite-valve – not required for periodic cleaning.
How to Store Your Tactical Hydration Bladder
- Make sure that all components of your Hydration System are completely dry.
- Connect all parts (bladder, drinking hose and drinking valve).
- Store the Hydration System in a clean and dry place (no direct sunlight and no extreme temperatures).
SOURCE Tactical Bladders – a favorite of soldiers, law enforcement, special forces and other professionals around the world.
SOURCE Hydration Technologies
Our tactical hydration bladders are extremely low care, dependable and durable, thanks to a number of hydration technologies which SOURCE has developed over the naturally of the death decades.
One main advantage of SOURCE bladders in comparison with market competitors is the GlassLike engineering : made of multilayer Polyethylene ( PE ), our reservoirs are 2,000 % smoother than those made from Thermoplastic Polyurethane ( TPU ), which is used by most other major brands .
SOURCE Hydration Packs require virtually zero maintenance. With the come on smooth as glass, biofilm and bacteria can not build up, therefore preventing any moldy taste in the water. additionally, we have embedded an disinfectant agent inside the multilayer film of the bladder and drinking metro – the GrungeGuard – to guarantee a fully running bladder over years of use .
I am broadly interested in how human activities influence the ability of wildlife to persist in the modified environments that we create.
Specifically, my research investigates how the configuration and composition of landscapes influence the movement and population dynamics of forest birds. Both natural and human-derived fragmenting of habitat can influence where birds settle, how they access the resources they need to survive and reproduce, and these factors in turn affect population demographics. Most recently, I have been studying the ability of individuals to move through and utilize forested areas which have been modified through timber harvest as they seek out resources for the breeding and postfledging phases. As well I am working in collaboration with Parks Canada scientists to examine in the influence of high density moose populations on forest bird communities in Gros Morne National Park. Many of my projects are conducted in collaboration or consultation with representatives of industry and government agencies, seeking to improve the management and sustainability of natural resource extraction.